Chapter 54 - Support for DKIM (DomainKeys Identified Mail) - RFC4871
Since version 4.70, DKIM support is compiled into Exim by default. It can be disabled by setting DISABLE_DKIM=yes in Local/Makefile.
Exim’s DKIM implementation allows to
Sign outgoing messages: This function is implemented in the SMTP transport. It can co-exist with all other Exim features, including transport filters.
Verify signatures in incoming messages: This is implemented by an additional ACL (acl_smtp_dkim), which can be called several times per message, with different signature contexts.
In typical Exim style, the verification implementation does not include any default "policy". Instead it enables you to build your own policy using Exim’s standard controls.
Please note that verification of DKIM signatures in incoming mail is turned on by default for logging purposes. For each signature in incoming email, exim will log a line displaying the most important signature details, and the signature status. Here is an example:
2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM: d=facebookmail.com s=q1-2009b c=relaxed/relaxed a=rsa-sha1 firstname.lastname@example.org t=1252484542 [verification succeeded]
You might want to turn off DKIM verification processing entirely for internal or relay mail sources. To do that, set the dkim_disable_verify ACL control modifier. This should typically be done in the RCPT ACL, at points where you accept mail from relay sources (internal hosts or authenticated senders).
1. Signing outgoing messages
Signing is implemented by setting private options on the SMTP transport. These options take (expandable) strings as arguments.
|dkim_domain||Use: smtp||Type: string†||Default: unset|
MANDATORY: The domain you want to sign with. The result of this expanded option is put into the $dkim_domain expansion variable.
|dkim_selector||Use: smtp||Type: string†||Default: unset|
MANDATORY: This sets the key selector string. You can use the $dkim_domain expansion variable to look up a matching selector. The result is put in the expansion variable $dkim_selector which should be used in the dkim_private_key option along with $dkim_domain.
|dkim_private_key||Use: smtp||Type: string†||Default: unset|
MANDATORY: This sets the private key to use. You can use the $dkim_domain and $dkim_selector expansion variables to determine the private key to use. The result can either
be a valid RSA private key in ASCII armor, including line breaks.
start with a slash, in which case it is treated as a file that contains the private key.
be "0", "false" or the empty string, in which case the message will not be signed. This case will not result in an error, even if dkim_strict is set.
|dkim_canon||Use: smtp||Type: string†||Default: unset|
OPTIONAL: This option sets the canonicalization method used when signing a message. The DKIM RFC currently supports two methods: "simple" and "relaxed". The option defaults to "relaxed" when unset. Note: the current implementation only supports using the same canonicalization method for both headers and body.
|dkim_strict||Use: smtp||Type: string†||Default: unset|
OPTIONAL: This option defines how Exim behaves when signing a message that should be signed fails for some reason. When the expansion evaluates to either "1" or "true", Exim will defer. Otherwise Exim will send the message unsigned. You can use the $dkim_domain and $dkim_selector expansion variables here.
|dkim_sign_headers||Use: smtp||Type: string†||Default: unset|
OPTIONAL: When set, this option must expand to (or be specified as) a colon-separated list of header names. Headers with these names will be included in the message signature. When unspecified, the header names recommended in RFC4871 will be used.
2. Verifying DKIM signatures in incoming mail
Verification of DKIM signatures in incoming email is implemented via the acl_smtp_dkim ACL. By default, this ACL is called once for each syntactically(!) correct signature in the incoming message.
To evaluate the signature in the ACL a large number of expansion variables containing the signature status and its details are set up during the runtime of the ACL.
Calling the ACL only for existing signatures is not sufficient to build more advanced policies. For that reason, the global option dkim_verify_signers, and a global expansion variable $dkim_signers exist.
The global option dkim_verify_signers can be set to a colon-separated list of DKIM domains or identities for which the ACL acl_smtp_dkim is called. It is expanded when the message has been received. At this point, the expansion variable $dkim_signers already contains a colon-separated list of signer domains and identities for the message. When dkim_verify_signers is not specified in the main configuration, it defaults as:
dkim_verify_signers = $dkim_signers
This leads to the default behaviour of calling acl_smtp_dkim for each DKIM signature in the message. Current DKIM verifiers may want to explicitly call the ACL for known domains or identities. This would be achieved as follows:
dkim_verify_signers = paypal.com:ebay.com:$dkim_signers
This would result in acl_smtp_dkim always being called for "paypal.com" and "ebay.com", plus all domains and identities that have signatures in the message. You can also be more creative in constructing your policy. For example:
dkim_verify_signers = $sender_address_domain:$dkim_signers
If a domain or identity is listed several times in the (expanded) value of dkim_verify_signers, the ACL is only called once for that domain or identity.
Inside the acl_smtp_dkim, the following expansion variables are available (from most to least important):
The signer that is being evaluated in this ACL run. This can be a domain or an identity. This is one of the list items from the expanded main option dkim_verify_signers (see above).
A string describing the general status of the signature. One of
none: There is no signature in the message for the current domain or identity (as reflected by $dkim_cur_signer).
invalid: The signature could not be verified due to a processing error. More detail is available in $dkim_verify_reason.
fail: Verification of the signature failed. More detail is available in $dkim_verify_reason.
pass: The signature passed verification. It is valid.
A string giving a litte bit more detail when $dkim_verify_status is either "fail" or "invalid". One of
pubkey_unavailable (when $dkim_verify_status="invalid"): The public key for the domain could not be retrieved. This may be a temporary problem.
pubkey_syntax (when $dkim_verify_status="invalid"): The public key record for the domain is syntactically invalid.
bodyhash_mismatch (when $dkim_verify_status="fail"): The calculated body hash does not match the one specified in the signature header. This means that the message body was modified in transit.
signature_incorrect (when $dkim_verify_status="fail"): The signature could not be verified. This may mean that headers were modified, re-written or otherwise changed in a way which is incompatible with DKIM verification. It may of course also mean that the signature is forged.
The signing domain. IMPORTANT: This variable is only populated if there is an actual signature in the message for the current domain or identity (as reflected by $dkim_cur_signer).
The signing identity, if present. IMPORTANT: This variable is only populated if there is an actual signature in the message for the current domain or identity (as reflected by $dkim_cur_signer).
The key record selector string.
The algorithm used. One of ’rsa-sha1’ or ’rsa-sha256’.
The body canonicalization method. One of ’relaxed’ or ’simple’.
The header canonicalization method. One of ’relaxed’ or ’simple’.
A transcript of headers and their values which are included in the signature (copied from the ’z=’ tag of the signature).
The number of signed body bytes. If zero ("0"), the body is unsigned. If no limit was set by the signer, "9999999999999" is returned. This makes sure that this variable always expands to an integer value.
UNIX timestamp reflecting the date and time when the signature was created. When this was not specified by the signer, "0" is returned.
UNIX timestamp reflecting the date and time when the signer wants the signature to be treated as "expired". When this was not specified by the signer, "9999999999999" is returned. This makes it possible to do useful integer size comparisons against this value.
A colon-separated list of names of headers included in the signature.
"1" if the key record has the "testing" flag set, "0" if not.
"1" if the key record forbids subdomaining, "0" otherwise.
Service type (tag s=) from the key record. Defaults to "*" if not specified in the key record.
Key granularity (tag g=) from the key record. Defaults to "*" if not specified in the key record.
Notes from the key record (tag n=).
In addition, two ACL conditions are provided:
ACL condition that checks a colon-separated list of domains or identities for a match against the domain or identity that the ACL is currently verifying (reflected by $dkim_cur_signer). This is typically used to restrict an ACL verb to a group of domains or identities. For example:
# Warn when message apparently from GMail has no signature at all warn log_message = GMail sender without DKIM signature sender_domains = gmail.com dkim_signers = gmail.com dkim_status = none
ACL condition that checks a colon-separated list of possible DKIM verification results agains the actual result of verification. This is typically used to restrict an ACL verb to a list of verification outcomes, like:
deny message = Message from Paypal with invalid or missing signature sender_domains = paypal.com:paypal.de dkim_signers = paypal.com:paypal.de dkim_status = none:invalid:fail
The possible status keywords are: ’none’,’invalid’,’fail’ and ’pass’. Please see the documentation of the $dkim_verify_status expansion variable above for more information of what they mean.